Staining Wooden Furniture And Types Of Stains

 

Wooden furniture is beautiful treasures that bring joy and a conventional look to the house. With the number of varieties of wood, one has a sea of choices to choose from. Though there are a number of wood types they can be bought down to two major classifications namely hardwoods and softwoods. However string and beautiful wooden furniture might be, most of them bound to lose their grace with time. It is to get back the shine and look of these worn out furniture is the staining process of immense importance. Staining is not just getting rid of the old paint and applying a new coat of paint, it has various steps to be followed to get that ultimate and perfect finish. Though the process requires time and patience, it is absolutely worth it.

 

Staining serves a lot of purpose like:

 

It can elevate the look of wooden grainsIt can make wooden furniture more expensive and rich than the original worth. It can be used to cover blemishes and give them a new look. It can be used to rejuvenate worn out furniture. Though not an advisable solution all the time, it is said to be of vital use for many reasons. An individual getting ready to stain a wooden piece has to consider many things and should have some sort of knowledge about the staining process; else it might backfire and make the wooden piece worse.

 

Few points to be noted before you stain wooden furniture:

 

Take a good look at the furniture and know the wood it is made up of. Some woods types do not accept staining and appear best in its original form only.Personal preference plays an important role in deciding whether to stain or not to stain the furniture. The grains and colors of the furniture also help in arriving at a decision. In short, it is better not to stain if you do not know the basics of staining and the type of wood and its characteristics. And also if you are not sure whether staining the particular piece would yield result or not.

 

Choosing the Best Stain:

 

The vital part in the staining process is to actually choose the suitable stain for the furniture. One has to have a clear understanding of the wood in order to choose the best satin for them. There are stains that come under different types of labels and one has to carefully consider them before going ahead and choosing them. There are many technical factors to be considered too. Find more interested information on www.danetti.com. The desired finish of the furniture is to be considered when going in for stain selection and it proper stains that are compatible with the desires polish and varnish. The secondary factor that has to be considered is the pigments that are to be mixed in the oil.

 

The various types of stains that are available in the market are as follows:

 

Pigmented Oil Stains:

 

These oil stains are non-penetrating in nature. They come with pigments that are mixed with linseed oil, turpentine, spirits or other such solvents. They are come as a gel and are relatively inexpensive and easy to apply on to the furniture. The only thing to be considered while choosing this type of stain is that the wood should have an open grain otherwise the stain might conceal the grains. These are apt for application on softwood types.

 

Penetrating Oil Stains:

 

These are stains that are widely used to stain softwoods in particular. They contain aniline dyes mixed with turpentine and prove to be an inexpensive and easy to apply stain. The only hitch with these types of stains is that they penetrate unevenly if not properly stained. Applying this stain involves wiping the stains and removing them once the required color is achieved. When opting for these types of stains one should be well aware that they must be sealed well in order to avoid smudging.

 

Non- Grain-Raising Stains:

 

These are popularly known as NGR Stains and are quite expensive when compared to its counterparts. These stains tend to bleed more and also fade away with time, to overcome this it is usually used as spirit-based stains.  Alcohol or spirit based NGR stains are easy to apply and quick to dry and are recommended for hardwoods.

Subscribe to our

Newsletter